Global Stim : Technical characteristics
1. Belt
Reference | EXBELT2M |
Size (unisex) | From EU34 to EU60 |
Length of the unfolded belt | 120 cm |
Fabric | 94 % polyester, 6 % elastane |
2. Main power supply
Reference | MN-A403-E120 |
AC/DC | 100-240V - 50/60Hz - 0.25A 5V 600mA |
Only use the power supply provided with the device.
Please replace it in the event of damage.
3. Adhesive electrodes
Global Stim works with adhesive, hydrophilic and hypoaartsllergenic electrodes.
Reference | EASF110x71 |
Contact area | 67.5 x 47 mm (x 2) |
Estimated life expectancy | 40 uses |
Norms |
Class I medical device (Directive 93/42/CEE) Considered as BF applied p. |
Please order new Global Stim - compatible adhesive electrodes on www.sport-elec.com
4. Unit
Norm | Class II a medical device in accordance with Directive 93/42/CEE Conformity CE 0459 - 92/42/EEC |
Software version | 1 |
Type of current | Symmetrical biphasic rectangular |
Number of programs | 8 programs |
Number of adjustable independent channels | 2 |
Current | from 0 to 60 mA - from 0 to 60 Vcc - from 0 to 1000 Ω |
Frequency range/Pulse width range | From 1 to 100 Hz / De 160 à 320 μs |
Power Rechargeable LiPo battery | 3.7V - 420mAh |
Unit dimensions and weight | 78 x 52 x 20 mm - 51 g |
Automatic stop at the end of each program | Yes - after approx. 4 min 30 sec of inactivity |
Activation safety | 100 % |
Detection absence of contact | Yes - independent detection on each of the 2 outputs |
Indicator of power LCD display | 2 graduated scales |
Indicator of low and/or defective battery | Yes - LCD display |
Indicator of programs LCD display | number 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 |
Temperature/Relative humidity for storage | 0 °C to + 40 °C / 10 % to 90 % |
Temperature/Relative humidity for use | + 5 °C to + 40 °C / 20 % to 65 % |
Connection of the electrode | 2 snap fasteners per electrode |
Warning | Read the instructions carefully. |
Guarantee/Life cycle | 2 years |
5. Recap for this non-medical device
|
|
These units are free of materials likely to have a negative impact on the environment |
|
|
Relative humidity for storage : from 10 to 90%. |
Temperature for storage: from 0 to 40° C. |
Name of the manufacturer bringing the device to the market. |
Please contribute to protect the environment by observing the disposal instructions. |
The manufacturer respects the environmental law and contributes to the cost of recovery and recycling. |
Follow the user manual instructions. |
Do not use if you carry a pacemaker. |
|
This device is intended for domestic use. |
Comments
0 comments
Article is closed for comments.