This function allows you to use the adhesive electrodes by connecting them directly to the modules.
You can use the device with 1 or 2 modules.
Connect each module to the unit by matching the color indicators (photo A ).
Fix the electrodes to the module(s) using the snap fasteners (photo B)
Positioning of the electrodes
Remove the plastic backing sheet from the electrodes (photos C ). Moisten them by spreading a drop of water onto the adhesive gel using your fingertips and wait 2 minutes.
Position the electrode(s) onto your body.
NB : The electrodes are for personal use. For hygiene reasons, they must always be used by the same person.
Starting the program
Start your device by following the « Starting the device » procedure ).
Contractions should be firm but must never cause any pain. If the electrodes cause you any discomfort : reduce the power levels, move the electrode(s) and then gradually increase the power. Also ensure that the electrodes are sufficiently moistened.
Now that the settings have been optimized, let your device get to work for the full duration of the program.
End of program
Once the program has finished, switch off the device by pressing the « » button, then disconnect the modules.
Gently remove the electrodes from your skin.
Moisten them slightly with a drop of water and replace them carefully onto their transparent plastic backing sheet.
Keep the adhesive electrodes in a plastic bag in a cool place (for example, a separate compartment in your refrigerator).