Utilisation                                                              

1. Position the 2 large electrodes inside the accessory                    

Position the large electrodes in the red frame.

2. Pass the electrode wires to the outside of the accessory                            

Pass the electrode wires through the cross slot of the accessory.

3. Clip the electrodes to the snaps of the accessory

Connect each large electrode on the outer side of the accessory to the snap button surrounded by a white circle.

4. Position the 4 small electrodes inside the accessory 

Connect each electrode to the outside of the accessory.

5. Passez les fils vers l'extérieur de l’accessoires par la fente en croix                

6. clip the electrodes on the nearest free snaps          

7. Connect the 2 generators of your electro-bodybuilding device to the accessory

Clip the 2 generators on the outside of the accessory

8. Remove the plastic fi lm from the electrodes and moisten them slightly with a little water

Moisten the electrodes to improve current conduction and comfort.
Keep the fi lm back to the electrodes after the session.

9. Put on maxibelt electrodes against your abdominal muscles                            

Scroll the belt in the back

10. Start your electro-stimulation device, choose the program and increase the power.

Please refer to the user manual of your device to choose the program that suits you.